Remote management
From Wikitech
(Difference between revisions)
ArielGlenn (Talk | contribs) (→Interface) |
|||
| (5 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
== Interface == | == Interface == | ||
| − | Most DRAC/LOM/IPMI/whatever should be reachable at ''servername''.mgmt.pmtpa.wmnet etc. | + | Most DRAC/LOM/IPMI/whatever should be reachable at ''servername''.mgmt.pmtpa.wmnet etc. Servers srv81-150 do not apparently have drac capability. (Servers srv121 through srv145 have ip addresses for management listed in racktables but they aren't pingable there; the rest don't even have that. Apparently 120-145 had IPMI and it was disabled. Was anything put in its place?) |
| − | + | ||
| − | + | ||
== DRAC == | == DRAC == | ||
| Line 20: | Line 18: | ||
== Others? == | == Others? == | ||
| − | * [[Platform-specific documentation]] | + | * See [[IPMI on Sun servers]] for our Sun boxes. There is also [[Platform-specific documentation]] for them. |
| + | |||
| + | == toolserver boxen == | ||
| + | |||
| + | * [[Toolserver/Use the SP for remote control]] - sorta current, there's an offsite page [[Toolserver]] that's more recent | ||
Latest revision as of 23:51, 30 September 2009
Contents |
[edit] Interface
Most DRAC/LOM/IPMI/whatever should be reachable at servername.mgmt.pmtpa.wmnet etc. Servers srv81-150 do not apparently have drac capability. (Servers srv121 through srv145 have ip addresses for management listed in racktables but they aren't pingable there; the rest don't even have that. Apparently 120-145 had IPMI and it was disabled. Was anything put in its place?)
[edit] DRAC
Most of the Dells have a remote management interface called DRAC. There's some docs at drac#Lights Out Management.
The most important command!
- racadm serveraction powercycle
[edit] IPMI
Some of the old SM boxes have IPMI. Is this still functional?
See IPMI#Cheat sheet
[edit] Others?
- See IPMI on Sun servers for our Sun boxes. There is also Platform-specific documentation for them.
[edit] toolserver boxen
- Toolserver/Use the SP for remote control - sorta current, there's an offsite page Toolserver that's more recent
