|
|
| (17 intermediate revisions by 6 users not shown) |
| Line 1: |
Line 1: |
| − | We have an automated installation system for Ubuntu server, using the [[Ubuntu installer]] and preseeding.
| + | #REDIRECT [[Build a new server]] |
| − | | + | |
| − | == How to install a server ==
| + | |
| − | | + | |
| − | === Information needed ===
| + | |
| − | | + | |
| − | * MAC Address
| + | |
| − | ** Note the mac address either from it being printed on the hardware, seeing it on boot or looking it up from the system bios within the management console.
| + | |
| − | * Internal or external based host
| + | |
| − | ** Choose whether this will be an externally routable host like ''zwinger.wikimedia.org'' or if its just internally routable like ''srv98.pmtpa.wmnet''
| + | |
| − | *** [[Network_design]] is a good reference point for understanding what vlans are available for the network.
| + | |
| − | ** Apply the correct vlan settings as documented at [[IOS_howto#moving_vlans]].
| + | |
| − | | + | |
| − | === System Install ===
| + | |
| − | | + | |
| − | * Add the host to the dhcpd.conf file on zwinger found in ''/etc/dhcp.conf'' and restart dhcpd.
| + | |
| − | * Connect through the management interface of your new host, power on the server, and netboot the box (e.g. hit F-12 during bootup if it's a Dell).
| + | |
| − | ** There are far more detailed instructions on how to interact with the remote management interfaces at [[Remote_management]]
| + | |
| − | | + | |
| − | If all works well, you should pull down an automated install from zwinger and lots of magical things will transpire until you
| + | |
| − | get to the partitioning screen.
| + | |
| − | | + | |
| − | * Follow the guidelines at [[partitioning]] on how best to slice up the disks.
| + | |
| − | * After boot up, log in using the root ssh key, and manually set the root password.
| + | |
| − | | + | |
| − | === Post Install ===
| + | |
| − | | + | |
| − | At this point you can add, migrate and install whatever in needed and available from our ubuntu repo.
| + | |
| − | * Add your new host to the [http://wikitech.wikimedia.org/view/Server_roles ServerRoles] page to properly track it.
| + | |
| − | * Monitoring ?
| + | |
| − | | + | |
| − | == Outstanding issues ==
| + | |
| − | | + | |
| − | * [[Partitioning]]
| + | |
| − | * mcelog
| + | |
| − | * security.ubuntu.com
| + | |
| − | * SSH keys repository
| + | |
| − | * Grub PXE booting
| + | |
| − | * Automatic setting of root password
| + | |
| − | | + | |
| − | == Problems ==
| + | |
| − | | + | |
| − | My host turned on through the management interface but got no dhcp lease
| + | |
| − | | + | |
| − | * Check ''/var/log/dhcpd.log'' on zwinger to see if the hosts request was ever received.
| + | |
| − | ** If it wasn't then there might be a link issue between the two hosts.
| + | |
| − | ** If it is there then pay attention to the error message. A message of no leases available can mean many things.
| + | |
| − | *** Check the mac address in dhcpd.conf to make sure you entered in the right address.
| + | |
| − | *** Make sure you have set the proper vlan on the switch that your new host is connected to.
| + | |
| − | | + | |
| − | ==Links==
| + | |
| − | | + | |
| − | === Ubuntu ===
| + | |
| − | * https://www-s.acm.uiuc.edu/wiki/space/ubuntu-cluster
| + | |
| − | * http://ftp.ubuntulinux.org/ubuntu/dists/breezy/main/installer-i386/current/doc/manual/en/ch04s06.html
| + | |
| − | * http://faiwiki.informatik.uni-koeln.de/index.php/Installing_Ubuntu_Linux_with_FAI
| + | |
| − | * http://dev.laptop.org/~krstic/dapper.seeds/
| + | |
| − | | + | |
| − | [[Category:Operating system]]
| + | |
| − | [[Category:Ubuntu]]
| + | |
