View source for OpenGear Serial Consoles

=== Setting up Ports ===
* You must either be on the LAN in the datacenter, or bridge yourself onto it for https access to the SCS server in question.
:* The scs servers require https connections.
* Once you have it on screen, you can setup additional ports under 'Serial Port' on the left side, then Edit the port in question.  If the port is not going to be used anymore, blank out all the information and name it 'Port ##'
* Save the information and it will now show up in the pmshell command below for accessing the consoles attached.


=== Connecting to Servers ===
* ssh into the console server
* connect to a specific port with <tt> pmshell port## (like port05)</tt> '''or''' just type <tt> pmshell </tt> and hit enter, and it will list assigned ports
* disconnect with <tt>~.</tt>



[[Category:Platform-specific documentation]]